Saturn V Limited Edition Skylab Rocket 1/100

The Estes Saturn V Skylab is an accurate 1:100 scale reproduction of this historic rocket and its space station payload. Vacuum formed tube wraps and fin fairings add a textured realism to this model’s surface. Injection molded fins are both durable and detailed – a fin alignment guide is included for precise placement. The detailed water-slide decals accurately represent the markings of this historic mission. Before flight, remove the realistic engine nozzle assembly and prep for launch. The Estes Saturn V Skylab can reach up to 400 feet on an Estes F15-4 engine. At ejection, the rocket separates into two sections for recovery – the Saturn V first and second stages return together under dual 24-inch parachutes, while the Skylab upper section sports its own 18-inch canopy. With impressive E-engine launches and multi-segment, multi-parachute recoveries, the Estes Saturn V Skylab will stand out in any model rocket fleet!

WHAT YOU NEED TO BUILD: Pencil, #220 #320 #400 and #600 sandpaper, ca, ca accelerator, epoxy, yellow glue, tube-type plastic cement, liquid plastic cement, putty for plastic models, sanding sealer, tweezers, hobby knife, sharp blades, masking tape, permanent spray adhesive (not artists’ or repositionable), paint (flat black, flat white, silver). (Tools, construction and finishing supplies not included.)

WHAT YOU NEED TO LAUNCH (sold separately): Porta-Pad E Launch Pad and E Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).

Recommended Engines: E16-4, F15-4
Projected Max Altitude: 400 ft. (122 m)
Recovery System: 1x 18 in. (45.7 cm) Parachute, 2x 24 in. (61 cm) Parachute
Length: 41.25 in. (104.8 cm)
Diameter: 3.94 in. (100 mm)
Estimated Weight: 17 oz. (481.9 g)
Estimated Assembly Time: 12 Hours (painting and glue drying time not included)
Fin Materials: Plastic
Decal Type: Waterslide
Launch System: Porta-Pad E and E Launch Controller
Launch Rod Size: 1/4"
Age Recommendation: Estes model rocketry is recommended for boys and girls ages 10+ with adult supervision for those under 12, and rocketeers of all ages.